Trading tools
Calculators and simulators — no sign-up.
Pick the question you want answered. The tool opens right below it.
Trading tools
Pick the question you want answered. The tool opens right below it.
Risk & planning
Does my strategy make money over time? What is the most I should ever bet? How much do I need to win back a loss? How long a losing streak should I expect? Am I overleveraged? What is my account worth with trades open?Practise & simulate
Practise placing orders See how a margin call happens Play with an equity curve What are my odds of blowing the account? See what leverage does to a tradeWork out how many lots to trade so a specific stop-loss distance risks exactly the percentage of your account you've decided on.
Fill in the fields and hit calculate to see your recommended position size.
Formula: dollar risk = balance × risk% → lots = dollar risk ÷ (stop-loss pips × pip value per lot). USD-quoted majors and metals use a flat pip value; USD-base pairs, JPY crosses, and gold/silver adjust using the price (and USD/JPY rate, for JPY crosses) you enter.
See the dollar result of a trade based on entry, exit, direction, and lot size — before or after you take it.
Fill in the fields and hit calculate to see the trade's result.
Positive results assume the trade moved in your favor for the direction selected; negative results are shown in red. This doesn't include spread, commission, or swap costs — check those separately with your broker.
Work out how much of your own capital a position ties up at a given leverage — not how much you should risk.
Fill in the fields and hit calculate to see the required margin.
Formula: margin = (lot size × contract size × price) ÷ leverage. USD-base pairs (USD/JPY, USD/CAD, etc.) use a flat $100,000 notional per standard lot; JPY crosses (EUR/JPY, GBP/JPY, AUD/JPY) convert using the USD/JPY rate you enter. Higher leverage lowers the margin needed — it doesn't lower your actual risk.
See your true account equity and margin level once open positions' floating profit or loss is factored in.
Fill in the fields and hit calculate to see your equity and margin level.
Equity = balance + floating P/L. Free margin = equity − used margin. Margin level = (equity ÷ used margin) × 100 — most brokers issue margin calls somewhere between 50–100%, but check your specific broker's threshold.
Place market, limit, and stop orders on a EUR/USD-style quote, then drag the market price to see exactly when — and at what price — each one fills.
EUR/USD: 1.1000
| Side / Type | Lots | Stop / Limit | Status |
|---|---|---|---|
| No pending orders | |||
| Side / Type | Lots | Fill price | Time |
|---|---|---|---|
| No executions yet | |||
A market order fills instantly at the current price. A limit buy/sell waits for the market to reach a better price and fills exactly there. A stop buy/sell waits for the market to reach a trigger price and then fills at whatever the market price is at that moment — it can slip. Prices here follow a EUR/USD-style quote (e.g. 1.1000), where a full pip is the fourth decimal place, worth a flat $10 per standard lot — the same convention used in the calculators above.
Set up an open position, then drag the slider to watch margin level fall toward a margin call and stop-out in real time.
Enter balance and used margin above, then drag the slider.
Margin level = (equity ÷ used margin) × 100, where equity = balance + floating P/L. Exact margin call and stop-out thresholds vary by broker — the defaults here (100% / 50%) are common, not universal — check your own broker's terms.
Leverage doesn't make a trade riskier by itself — it changes how large a position your margin lets you open, which changes how small a move it takes to erase the account. Compare two leverage levels side by side.
Fill in your balance and pick two leverage levels to compare.
Assumes the full allowed position (at your chosen share of max size) is opened on a EUR/USD-style quote near 1.1000 and held with no stop-loss. The move shown is what it takes for the position's loss to equal 100% of the margin used — not a recommended stop distance.
Set a win rate and reward:risk ratio, then run a simulated sequence of trades. The same long-run edge can still produce a smooth climb or a brutal drawdown along the way — that's variance, not a flawed strategy.
Set your parameters and run the simulation to see an equity curve.
Each click uses a fresh random sequence of wins and losses at your chosen win rate — run it several times in a row. Risk is applied to current balance each trade (compounding), so a run of losses shrinks position size along with it.
A quick reference: what one pip is actually worth at standard, mini, and micro lot sizes for a given instrument.
Pick an instrument and hit calculate to see pip value by lot size.
A "pip" here means the standard fourth decimal place (second decimal for JPY pairs and gold/silver's conventions as used elsewhere on this page). A standard lot is 100,000 units of the base currency, a mini lot 10,000, and a micro lot 1,000.
How commonly-traded pairs tend to move in relation to each other — useful for spotting when "three different trades" are actually one trade in disguise.
Reading it: values close to +1 mean the pairs tend to move in the same direction; close to −1 means they tend to move in opposite directions; close to 0 means little consistent relationship. Darker green = stronger positive, darker red = stronger negative.
A quick, three-input gut check — not a full position-size plan. For that, use the Position Size calculator above.
Fill in the fields and hit check to see what you're actually risking.
This checks dollar risk if your stop-loss is hit against your account balance — it has nothing to do with your broker's leverage setting directly. High leverage doesn't create risk by itself; an oversized position relative to your account does. See the leverage and margin lesson for why that distinction matters.
Don't take a broker's "regulated by..." claim at face value — every regulator below runs a free, public register you can search yourself in under a minute.
Search by the broker's exact legal entity name (not just its brand name) or its license/registration number, both usually disclosed in a broker's website footer or legal documents. A broker operating under an unlisted or unfamiliar regulator is itself worth treating as a flag — see the what "regulated" actually means lesson.
Forex trades 24 hours a day, but volume and volatility are not even across the day — they cluster around these four regional sessions.
Times shown are approximate, typical session windows — they shift by an hour depending on daylight saving in each region. Treat this as a guide to when liquidity tends to be highest, not an exact schedule. The heaviest volume usually falls where two sessions overlap, especially London/New York.
"Spreads from 0.0 pips" sounds free. This turns a spread-plus-commission quote into an actual dollar cost over a month or year of trading.
Fill in the spread, commission, and trade frequency to see the real cost.
Some brokers quote commission "per side" (charged on both entry and exit) rather than "round turn" (the combined entry+exit cost) — check which one your broker means, since it changes this number by 2×. This is the cost of trading alone, before any consideration of whether the trades themselves were profitable.
Compares your planned trade frequency against what you actually traded, and isolates the cost of just the extra trades — the ones a plan didn't call for.
Fill in both trade counts to see what the extra trades alone cost.
This only counts spread and commission — it says nothing about whether the extra trades won or lost. Even a strategy with a real edge has to clear this cost before it's actually profitable. See the overtrading lesson and the anatomy of a bad month case study.
Runs thousands of simulated trade sequences at your inputs and reports how often a run like that hits a serious drawdown — a probability, not a prediction of what will happen to you.
Fill in the fields and run the simulation to see a risk-of-ruin estimate.
Each simulated trade risks the chosen percentage of the current balance (not the original balance), which is how most position-sizing rules work in practice. This is a simplified model — it assumes independent trades, a fixed win rate, and no correlation between trades, which real trading rarely matches exactly. Treat the output as directional, not exact.
The actual round-turn cost — spread plus commission — of one trade at each broker listed on this site, using their currently published Standard/entry-level and raw/ECN account terms. Pick an instrument and lot size to see them ranked.
Choose an instrument and lot size to rank every broker's accounts by round-turn cost.
Spread cost assumes the "from" spread each broker publishes for majors — actual spreads float with market conditions and can run wider, especially around news. This compares spread + commission only; it does not include swap/overnight financing, which varies by instrument, direction, and broker, and isn't published as a flat rate. See the swap rates lesson for that piece of the picture. Figures are pulled from the account tables on the brokers page — always confirm current terms directly with the broker before trading.
Win rate alone says nothing about profitability, as the win rate and profit factor lesson covers. This turns win rate plus average win/loss size into the number that actually matters: expected result per trade.
Enter a win rate and average win/loss size to see expectancy per trade.
Average win and loss should come from your own trading data — the data collection lesson and the journal template show how to track them — not an assumption. Past results, including the ones you've logged yourself, don't guarantee future ones; this only does the arithmetic on numbers you provide.
The Kelly formula gives the risk per trade that would grow an account fastest if your win rate and reward:risk were known exactly. They never are, so treat the result as a ceiling to study, not a size to trade. The Kelly criterion lesson explains why.
Enter a win rate and a reward:risk ratio to see the Kelly fraction.
Assumes every trade risks the same amount, wins pay a fixed multiple of it, and trades are independent. Real results have estimation error, and an overstated edge means overbetting. Many traders who use Kelly at all use half or quarter Kelly. Educational only, not advice.
A loss needs a bigger percentage gain to get back to where you started. This shows how much bigger, and how long it could take. The rebuilding after a drawdown lesson covers the mindset side.
Enter a drawdown percentage to see the gain needed to recover.
Months are a rough guide that assumes a steady average gain each month, which real trading rarely delivers. Educational only.
Even a profitable approach has losing runs. This estimates how likely a losing streak of a given length is over your next set of trades, and what it would do to the account. See the losing streak lesson.
Fill in the fields to see how likely losing streaks are.
Assumes each trade is independent with the same win rate. Real trades can cluster. The drawdown shown compounds the loss on the current balance. Educational only.
The Pip & Lot Value tool shows USD values. If your account is in CAD, EUR, GBP or another currency, a pip is worth a different amount. Pick the pair and your account currency, then enter your platform's live exchange rate if the two differ. See the pips, lots and pip value lesson.
Choose a pair and an account currency to see what one pip is worth.
Pip value = lot size × pip size, converted from the pair's quote currency into your account currency at the live rate. Your broker's figure can differ slightly because of rounding and the rate it uses. Educational only.
Holding a position past the daily rollover usually costs (or earns) a swap. This adds it up over your holding period, including the triple-swap night. Always read the swap figures on your own broker's platform, because they change. See the swap rates lesson.
Enter the swap from your broker and how long you hold to see the total.
Assumes the swap is charged at each Monday to Friday rollover, three times on Wednesday (the usual convention for forex pairs, but some instruments such as indices or crypto differ), and not on weekends. Your broker's schedule and rates are what count. Educational only.
Compare common risk-per-trade levels side by side: how many dollars each puts on the line, and what a run of losses does to the account. The position sizing lesson explains the reasoning.
Enter your balance to compare risk levels.
Each loss is a full-risk loss applied to the current balance, so drawdowns compound. Real losses can exceed the planned risk because of slippage and gaps. Educational only.
Log your trades and see your win rate, expectancy, profit factor, drawdown and losing streaks update as you go. Everything is stored only in this browser on this device. Nothing is sent to Evenline. Use Export CSV to keep a copy. See the journal lesson and the Excel journal.
Add a trade to see your stats.
Stats are only as good as the data. A handful of trades says little, so wait for at least 100 before reading much into expectancy (see the data collection lesson). Entries live in your browser storage: clearing site data or switching browser or device removes them, so export a CSV regularly. Educational only.
Download the trading journal (Excel) → or the printable PDF — or just the plain .csv.
Want the theory behind the numbers?
These calculators are provided for educational and planning purposes only and are not financial advice. Results are estimates based on standard contract-size conventions and may not reflect your specific broker's exact pip values, margin rules, fees, or execution prices. Trading forex and CFDs involves significant risk of loss and is not suitable for every investor.